|
|
Trade Leads: |
| [SELL] PAPEMP(Polyamino Polyether Methylene Phosphonae) [2008-06-11] |
| Polyamino Polyether Methylene
Phosphonae (PAPEMP)
Molecular weight: about 600
Properties:
PAPEMP is a new kind of water
treatment agent. PAPEMP has high
chelation and dispersion effects,
high value of calcium tolerance,
and good scale inhibition
effects. PAPEMP can be used as
scale and corrosion inhibitor in
circulating cool water system and
oilfield refill water system in
situations of high hardness, high
alkali and high pH value. PAPEMP
has excellent scale inhibition
ability to calcium carbonate,
calcium sulfate and calcium
phosphate. PAPEMPcan efficiently
inhibit the formation of silica
scale, stabilize metal ions such
as Zn, Mn and Fe.
PAPEMP can be used as scale
inhibitor for reverse osmosis
system and multistep flash
vaporization system in which high
salt concentration, high
turbidity and high temperature
are usually encountered (such as
high temperature and high
turbidity in coal vaporization
system), accessory agent for
woven & dyeing (for example,
yellow turnback inhibition
agent), as alternatives of EDTA,
DTPA and NTA .
Specification:
items index
Appearance Yellow to umber
transparent liquid
Solid content % 45.0 min
Active component (PAPEMP) % 40.0
min
Phosphorous acid (as PO43-)% 1.0
max
Density (20℃) g/cm3 1.20±0.05
pH (1%solution) 2.0±0.5
Usage:
The dosage of 5-100mg/L is
preferred. Different from other
Water Treatment Chemicals, the
more quantity is, the better the
effect. PAPEMP can be built with
polycarboxylic acids.
Package and Storage:
Normally In 250kg net Plastic
Drum, IBC drum can also be used
as required. Storage for ten
months in room shady and dry
place.
... |
|
 |
| [SELL] Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium (EDTMPS) [2008-06-16] |
| Ethylene Diamine Tetra (Methylene
Phosphonic Acid) Sodium (EDTMPS)
CAS No. 1429-50-
1
Dequest: 2040
Molecular Formula:
C6H12O12N2P4Na8
Molecular weight: 612.13
Structural Formula:
Properties:
EDTMPS is nitrogenous organic
polyphosphonic acid, a part of
cathodic corrosion inhibitor.Its
corrosion inhibition is 3~5 times
better than that of inorganic
polyphosphate. It can be fully
dissolved in water, innocuous and
none pollution to environment,
has good chemical stability and
thermal tolerance. It shows
excellent scale inhibition
ability under temperature 200℃.
It can dissociate into 8 positive-
negative ions, thus can chelate
with many metal ions to form
polymer reticulation complex, to
destroy the normal
crystallization of calcium scale.
EDTMPS shows better antiscale
effects to calcium sulfate and
barium sulfate.
Specification:
items index
Appearance Clear yellow to umber
transparent liquid
Active component(EDTMPS)%
30.0min
Organic phosphonic acid(asPO43-
)% 10.0min
Phosphorous acid(as PO33-)%
5.0max
Phosphoric acid (asPO43- )%
1.0max
pH(1% water solution) 9.5-10.5
Density (20℃)g/cm3 1.25min
Chloride (as Cl-)% 3.0max
Usage:
EDTMPS can be used as corrosion
inhibitor in circulating cool
water system and boiler water. It
is a chelating agent in non-
cyanogen electroplating industry
and a water-softening agent in
printing & dyeing industry. When
used alone, 2~10mg/L is
preferred. When built with HPMA
by ratio ETDMP:HPMA=1:3, it can
be used for low pressure boiler.
It can also be built with BTA,
PAAS and zinc salt.
Package and Storage:
Normally In 250kg net Plastic
Drum, IBC drum can also be used
as required. Storage for ten
months in room shady and dry
place.
... |
|
 |
| [SELL] 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP) [2008-06-23] |
| 1-Hydroxy Ethylidene-1,1-
Diphosphonic Acid (HEDP)
CAS No. 2809-21-
4
Dequest:2010
Molecular Formula:
C2H8O7P2 Molecular
weight: 206.02
Structural Formula:
Properties:
HEDP is an organophosphoric acid
corrosion inhibitor. It can
chelate with Fe, Cu, and Zn ions
to form stable chelating
compounds.It can dissolve the
oxidized materials on these
metals’ surfaces. HEDP shows
excellent scale and corrosion
inhibition effects under
temperature 250℃. HEDP has good
chemical stability under high pH
value, hard to be hydrolyzed, and
hard to be decomposed under
ordinary light and heat
conditions. Its acid/alkali and
chlorine oxidation tolerance are
better than that of other
organophosphoric acids (salt).
HEDP can react with metal ions in
water system to form hexa-element
chelating complex, with calcium
ion in particular. Therefore,
HEDP has good antiscale and
visible threshold effects. When
built together with other water
treatment chemicals, it shows
good synergistic effects.
The solid state of HEDP is
crystal powder, suitable for
usage in winter and freezing
districts. Because of its high
purity, it can be used as
cleaning agent in electronic
fields and as additives in daily
chemicals.
Specification:
items index
Appearance Colorless or light
yellow transparent liquid White
crystal powder
Active content(HEDP)% 58.0-
62.0 89.0 min
Phosphorous acid(as PO33-)% 2.0
max 0.5 max
Phosphoric acid (asPO43- )% 0.8
max 0.5 max
Chloride (as Cl-)% 0.01 max 0.01
max
pH(1% solution) 2 max 2 max
Density (20℃)g/cm3 1.40 —
Fe ion ppm 10 max 20 max
Colour APHA (Hazen) 40 max —
Usage:
HEDP is used as scale and
corrosion inhibition in
circulating cool water system,
oil field and low-pressure
boilers in fields such as
electric power, chemical
industry, metallurgy, fertilizer,
etc.. In light woven industry,
HEDP is used as detergent for
metal and nonmetal. In dyeing
industry, HEDP is used as
peroxide stabilizer and dye-
fixing agent; In non-cyanide
electroplating, HEDP is used as
chelating agent. The dosage of 1-
10mg/L is preferred as scale
inhibitor, 10-50mg/L as corrosion
inhibitor, and 1000-2000mg/L as
detergent. Usually, HEDP is used
together with polycarboxylic
acid.
Package and Storage:
HEDP liquid: Normally In 250kg
net Plastic Drum, IBC drum can
also be used as required HEDP
solid: 25kg inner liner
polyethylene (PE) bag, outer
plastic woven bag, or confirmed
by clients.
Storage for ten months in room
shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye
and skin, once contacted, flush
with water
... |
|
 |
| [SELL] Ethylene Diamine Tetra (Methylene Phosphonic Acid) EDTMPA (Solid) [2008-06-23] |
| Ethylene Diamine Tetra (Methylene
Phosphonic Acid) EDTMPA (Solid)
CAS No 1429-50-
1
Dequest: 2040
Molecular Formula: C6H20
N2O12P4 Molecular
weight: 436.13
Structural Formula:
Properties:
EDTMPA is white crystal powder at
room temperature, with melting
point 215-217℃, hard to be
dissolved in water, the
solubility is less that 5% at
room temperature, easy dissolved
in ammonia. EDTMPA has strong
metal ion chelating capacity,
whose chelating constant with
cuprum ion is larger than that of
EDTA.
EDTMPA has high capacity for
chelating metal ions. The complex
constant with Cu is the largest
in all chelating agents including
EDTA. EDTMPA is a kind of high-
pure grade reagent and innocuous,
it can be used as detergent in
semiconductor chip to prepare
integrated circuit, as carrying
agent for radioelement in medical
industry, and as agent for
inspection and therapy. The
chelating capacity of EDTMPA
largely exceed that of EDTA and
DTPA, and can replace EDTA for
chelating agent at almost any
situation.
Specification:
items index
Appearance White crystal powder
Active acid % 95.0min
Total phosphonic acid(as PO43-)%
82.0 min
Dryness weight loss % 2.0 max
Fe ppm 5 max
Cl % 0.1 max
pH(1% solution) 2.0 max
Our company can produce 99%
(chromatograph purity) and high
purity product on demand of
clients.
Package and Storage:
25kg inner liner polyethylene
(PE) bag, outer plastic woven
bag, with agreement with export
environment requirement, or
confirmed by clients. Storage for
one year in room shady and dry
place.
Keywords: EDTMPA
Related Products: Ethylene
Diamine Tetra (Methylene
Phosphonic Acid) EDTMPA
Hepta sodium salt of Diethylene
Triamine Penta (Methylene
Phosphonic Acid) (DTPMP•Na7)
Ethylene Diamine Tetra (Methylene
Phosphonic Acid) Sodium (EDTMPS)
... |
|
 |
| [SELL] HexaMethyleneDiamineTetra (MethylenePhosphonic Acid) HMDTMPA [2008-06-11] |
| HexaMethyleneDiamineTetra
(MethylenePhosphonic Acid) HMDTMPA
CAS No 23605-74-
5
Dequest: 2051
Properties:
HMDTMPA is a white crystal powder
at room temperature, slightly
soluble in water, with solubility
less than 5%.
HMDTMPA can inhibit most scale
formation such as calcium
carbonate, calcium sulfate,
barium sulfate and ferric oxide.
As water treatment chemicals,
HDTMPA is used as scale
inhibitors for calcium sulfate
and barium sulfate, for calcium
sulfate in particular. It has
high scale inhibition rate and
can last for long effective time.
HMDTMPA can be used for crush
treatment in oilfield and for
water treatment in boiler.
Specification:
items index
Appearance White crystal powder
Active component (as HDTPMA-) %
98.0 min
... |
|
 |
| [SELL] PAPEMP [2008-06-16] |
| PAPEMP is a new kind of water
treatment agent. PAPEMP has high
chelation and dispersion effects,
high value of calcium tolerance,
and good scale inhibition
effects. PAPEMP can be used as
scale and corrosion inhibitor in
circulating cool water system and
oilfield refill water system in
situations of high hardness, high
alkali and high pH value. PAPEMP
has excellent scale inhibition
ability to calcium carbonate,
calcium sulfate and calcium
phosphate. PAPEMPcan efficiently
inhibit the formation of silica
scale, stabilize metal ions such
as Zn, Mn and Fe.
PAPEMP can be used as scale
inhibitor for reverse osmosis
system and multistep flash
vaporization system in which high
salt concentration, high
turbidity and high temperature
are usually encountered (such as
high temperature and high
turbidity in coal vaporization
system), accessory agent for
woven & dyeing (for example,
yellow turnback inhibition
agent), as alternatives of EDTA,
DTPA and NTA.
... |
|
 |
| [SELL] PAPE--Polyhydric alcohol phosphate ester [2008-06-16] |
| Shandong Taihe Water Treatment
Co., Ltd.
Xiwangzhuang town, Shizhong
district, Zaozhuang city, Shandong
Province, P. R. China
Tel:+86-632-5113066 Fax:+86-
632-5112055
E-Mail: moon@thwater.com
export@thwater.net
Polyhydric alcohol phosphate ester
(PAPE)
Properties :
PAPE is a new kind of water
treatment chemicals. It has good
scale and corrosion inhibition
ability. Because more than one
ployethylene glycol group is
introduced into the molecular, the
scale and corrosion inhibition for
calcium scale is improved. It has
good inhibition effect for barium
and strontium scales. PAPE has
good scale inhibition effect for
calcium carbonate and calcium
sulfate, it can mix well with
polycarboxylic acid,
organophoronic acid, phosphate and
zinc salt.
PAPE can be used as scale
inhibitor for oilfield
(recommended as alternatives of
Nalco Visco 953) and industrial
cool water system.
Specification:
items index
Appearance Colorless or light
yellow transparent liquid
Solid content % 50.0 min
Total phosphoric acid(PO43-)%
30.0 min
Organophosphonic acid(PO43-)% 15
min
pH(1% solution) 2.0-3.0
Usage:
when used as scale inhibitor, less
than 15mg/L is preferred, when
used in closed circulating system,
150mg/L can be expected.
Package and Storage:
Normally In 250kg net Plastic
Drum, IBC drum can also be used as
required. Storage for ten months
in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye
and skin, once contacted, flush
with water.
Website:
http://www.taihe-water.com/01-
PAPE.htm
http://www.thchem.cn/01-PAPE.htm
http://www.thwater.com/01-PAPE.htm
http://www.th-chem.com/01-PAPE.htm
http://www.th-water-
treatment.com/shuichuliji/01-
PAPE.htm
http://www.thwater.net/01-PAPE.htm
http://www.shuichuliji.com/01-
PAPE.htm
http://www.shuichuliyaoji.net.cn/01
-PAPE.htm
http://www.watertreatmentchemical.u
s/01-PAPE.htm
http://www.watertreatmentchemical.t
w/01-PAPE.htm
http://www.watertreatmentchemical.h
k/01-PAPE.htm
http://www.watertreatmentchemical.i
n/01-PAPE.htm
http://www.watertreatmentchemical.r
u/01-PAPE.htm
... |
|
 |
 |
| [SELL] 2-Hydroxyphosphonocarboxylic Acid (HPAA) [2008-06-16] |
| 2-Hydroxyphosphonocarboxylic Acid
(HPAA)
CAS No 23783-26-8
Molecular Formula:
C2H5O6P
Molecular weight: 156
Structural Formula:
Properties:
HPAA is chemically stable, hard
to be hydrolyzed, hard to be
destroyed by acid or alkali,
safety in use, no toxicity, no
pollution. HPAA can improve zinc
solubility. Its corrosion
inhibition ability is 5-8 times
better than that of HEDP and
EDTMP. When built with low
molecular polymers, its corrosion
inhibition effect is even better.
Specification:
items index
Appearance Dark umber transparent
viscous liquid
Solid content % 47.0-50.0
Phosphorous acid(as PO33-)% 4.0
max
Density (20℃)g/cm3 1.30 min
pH(1% solution) 1.0-3.0
Usage:
HPAA is mainly used as cathode
corrosion inhibitor in oilfield
refill water system in fields
such as steel & iron,
petrochemcal, power plant and
medical industries. When built
with zinc salt, the effect is
even better.
Package and Storage:
Normally In 250kg net Plastic
Drum, IBC drum can also be used
as required. Storage for one year
in room shady and dry place.
... |
|
 |
| [SELL] Polyhydric alcohol phosphate ester (PAPE) [2008-06-16] |
| Polyhydric alcohol phosphate
ester (PAPE)
Properties :
PAPE is a new kind of water
treatment chemicals. It has good
scale and corrosion inhibition
ability. Because more than one
ployethylene glycol group is
introduced into the molecular,
the scale and corrosion
inhibition for calcium scale is
improved. It has good inhibition
effect for barium and strontium
scales. PAPE has good scale
inhibition effect for calcium
carbonate and calcium sulfate, it
can mix well with polycarboxylic
acid, organophoronic acid,
phosphate and zinc salt.
PAPE can be used as scale
inhibitor for oilfield
(recommended as alternatives of
Nalco Visco 953) and industrial
cool water system.
Specification:
items index
Appearance Colorless or light
yellow transparent liquid
Solid content % 50.0 min
Total phosphoric acid(PO43-)%
30.0 min
Organophosphonic acid(PO43-)% 15
min
pH(1% solution) 2.0-3.0
Usage:
when used as scale inhibitor,
less than 15mg/L is preferred,
when used in closed circulating
system, 150mg/L can be expected.
Package and Storage:
Normally In 250kg net Plastic
Drum, IBC drum can also be used
as required. Storage for ten
months in room shady and dry
place.
Safety Protection:
Acidity, Avoid contact with eye
and skin, once contacted, flush
with water.
... |
|
 |
>> Total 15, 2pages,showing 1-- 10 1 2 Next
<< |
|